{"id":597,"date":"2015-04-09T13:38:37","date_gmt":"2015-04-09T19:38:37","guid":{"rendered":"http:\/\/araautoaccessories.com\/?page_id=597"},"modified":"2025-02-25T15:28:47","modified_gmt":"2025-02-25T22:28:47","slug":"powerbass","status":"publish","type":"page","link":"https:\/\/araautoaccessories.com\/wordpress\/audio-video\/audio\/car-audio\/powerbass\/","title":{"rendered":"PowerBass"},"content":{"rendered":"\n
Speakers<\/a><\/h5>\n\n\n\n
Subwoofers<\/a><\/h5>\n\n\n\n
\n\n\n\n

Powerbass Amplified Powersports Soundbar with Bluetooth<\/h2>\n\n\n\n
\n
\n

XL650<\/h2>\n\n\n\n

$1000<\/strong><\/p>\n\n\n

\n
\"\"<\/figure>\n<\/div>\n\n\n
    \n
  • 6 Speaker 300W Soundbar\n
      \n
    • 600W Max<\/li>\n\n\n\n
    • 2 x 150W RMS @2 ohms<\/li>\n<\/ul>\n<\/li>\n\n\n\n
    • IPX6 Rated, Waterproof Wire Loom Connectors<\/li>\n\n\n\n
    • Two 3.5″ Square Poly Cone Woofers<\/li>\n\n\n\n
    • Two 3″ Full Range Marine Grade Poly Cone Speakers<\/li>\n\n\n\n
    • Two 1″ SD Mylar Tweeters <\/li>\n\n\n\n
    • 50Hz – 22kHz Frequency Response<\/li>\n\n\n\n
    • LED Backlit Control Panel and visual notifications<\/li>\n\n\n\n
    • Audible On\/Off notifications<\/li>\n\n\n\n
    • Built-In DSP<\/li>\n\n\n\n
    • Heavy Duty Extruded Aluminum Water Tight Housing<\/li>\n\n\n\n
    • Built in Bluetooth<\/li>\n\n\n\n
    • Wired RCA Input<\/li>\n\n\n\n
    • 2 Volt RCA Line Out<\/li>\n\n\n\n
    • Auto Turn-Off Circuit\n
        \n
      • eliminates battery drain when not in use<\/li>\n<\/ul>\n<\/li>\n\n\n\n
      • Universal L-Mount Brackets or Stud Bolt-In Mounting System<\/li>\n\n\n\n
      • 4.9″ (h) x 21″ (w) x 4.4″ (d)<\/li>\n\n\n\n
      • Includes:\n
          \n
        • soundbar<\/li>\n\n\n\n
        • aluminum grill<\/li>\n\n\n\n
        • stainless steel\/aluminum mounting hardware<\/li>\n\n\n\n
        • wiring harness<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n<\/div>\n\n\n\n
          \n

          XL850<\/h2>\n\n\n\n

          $1150<\/strong><\/p>\n\n\n

          \n
          \"\"<\/figure>\n<\/div>\n\n\n
            \n
          • 8 Speaker 400W Soundbar\n
              \n
            • 800W Max<\/li>\n\n\n\n
            • 2 x 200W RMS @2 ohms<\/li>\n<\/ul>\n<\/li>\n\n\n\n
            • IPX6 Rated, Waterproof Wire Loom Connectors<\/li>\n\n\n\n
            • Four 3.5″ Square Poly Cone Woofers<\/li>\n\n\n\n
            • Two 3″ Full Range Marine Grade Poly Cone Speakers<\/li>\n\n\n\n
            • Two 1″ SD Mylar Tweeters <\/li>\n\n\n\n
            • 50Hz – 22kHz Frequency Response<\/li>\n\n\n\n
            • LED Backlit Control Panel and visual notifications<\/li>\n\n\n\n
            • Audible On\/Off notifications<\/li>\n\n\n\n
            • Built-In DSP<\/li>\n\n\n\n
            • Heavy Duty Extruded Aluminum Water Tight Housing<\/li>\n\n\n\n
            • Built in Bluetooth<\/li>\n\n\n\n
            • Wired RCA Input<\/li>\n\n\n\n
            • 2 Volt RCA Line Out<\/li>\n\n\n\n
            • Auto Turn-Off Circuit\n
                \n
              • eliminates battery drain when not in use<\/li>\n<\/ul>\n<\/li>\n\n\n\n
              • Universal L-Mount Brackets or Stud Bolt-In Mounting System<\/li>\n\n\n\n
              • 4.9″ (h) x 27″ (w) x 4.4″ (d)<\/li>\n\n\n\n
              • Includes:\n
                  \n
                • soundbar<\/li>\n\n\n\n
                • aluminum grill<\/li>\n\n\n\n
                • stainless steel\/aluminum mounting hardware<\/li>\n\n\n\n
                • wiring harness<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n<\/div>\n\n\n\n
                  \n

                  XL1250<\/h2>\n\n\n\n

                  $1250<\/strong><\/p>\n\n\n

                  \n
                  \"\"<\/figure>\n<\/div>\n\n\n
                    \n
                  • 12 Speaker 500W Soundbar\n
                      \n
                    • 1000W Max<\/li>\n\n\n\n
                    • 2 x 250W RMS @2 ohms<\/li>\n<\/ul>\n<\/li>\n\n\n\n
                    • IPX6 Rated, Waterproof Wire Loom Connectors<\/li>\n\n\n\n
                    • Six 3.5″ Square Poly Cone Woofers<\/li>\n\n\n\n
                    • Two 3″ Full Range Marine Grade Poly Cone Speakers<\/li>\n\n\n\n
                    • Four 1″ SD Mylar Tweeters <\/li>\n\n\n\n
                    • 50Hz – 22kHz Frequency Response<\/li>\n\n\n\n
                    • LED Backlit Control Panel and visual notifications<\/li>\n\n\n\n
                    • Audible On\/Off notifications<\/li>\n\n\n\n
                    • Built-In DSP<\/li>\n\n\n\n
                    • Heavy Duty Extruded Aluminum Water Tight Housing<\/li>\n\n\n\n
                    • Built in Bluetooth<\/li>\n\n\n\n
                    • Wired RCA Input<\/li>\n\n\n\n
                    • 2 Volt RCA Line Out<\/li>\n\n\n\n
                    • Auto Turn-Off Circuit\n
                        \n
                      • eliminates battery drain when not in use<\/li>\n<\/ul>\n<\/li>\n\n\n\n
                      • Universal L-Mount Brackets or Stud Bolt-In Mounting System<\/li>\n\n\n\n
                      • 4.9″ (h) x 33.75″ (w) x 4.4″ (d)<\/li>\n\n\n\n
                      • Includes:\n
                          \n
                        • soundbar<\/li>\n\n\n\n
                        • aluminum grill<\/li>\n\n\n\n
                        • stainless steel\/aluminum mounting hardware<\/li>\n\n\n\n
                        • wiring harness<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n<\/div>\n<\/div>\n\n\n\n
                          \n\n\n\n

                          XLPS200 Powerbass 2.75″ Amplified Bluetooth Speaker Pods<\/h2>\n\n\n\n

                          $450 In Stock!<\/strong><\/p>\n\n\n

                          \n
                          \"\"<\/figure>\n<\/div>\n\n\n
                            \n
                          • Marine Grade 2.75″ Pod Speakers<\/li>\n\n\n\n
                          • Fits \u00be” – 1″ Bar Sizes<\/li>\n\n\n\n
                          • Injection Molded UV-Treated Polypropylene cone<\/li>\n\n\n\n
                          • Water tight TPU surround<\/li>\n\n\n\n
                          • 50W RMS D-Class Amplifier<\/li>\n\n\n\n
                          • 120 Hz – 22kHz frequency response<\/li>\n\n\n\n
                          • Built in Bluetooth<\/li>\n\n\n\n
                          • Easy to use top mounted control pad<\/li>\n\n\n\n
                          • Sold in pairs<\/li>\n<\/ul>\n\n\n\n
                            \n\n\n\n

                            L Series – Factory Replacement Speakers<\/h4>\n\n\n\n

                            Powerbass’ L Series was designed to upgrade factory systems. The L Series Wave Guide Lens compliments the 3\/4″ aluminum alloy dome tweeter to allow you to hear even more details from your music like never before.<\/p>\n\n\n\n

                            Utilizing a 2-Ohm voice coil the L Series is engineered to work in modern vehicles where a lower Ohm rating is required. This lower impedance will make more efficient use of your amplifier’s power.<\/p>\n\n\n\n

                            \n\n\n\n

                            L2-700 Powerbass 7″ 2 Ohm Mid-Range Speakers<\/h2>\n\n\n\n

                            $180 In Stock!<\/strong><\/p>\n\n\n

                            \n
                            \"\"<\/figure>\n<\/div>\n\n\n
                              \n
                            • 7″ Co-axial speaker system<\/li>\n\n\n\n
                            • OEM Drop-in replacement design<\/li>\n\n\n\n
                            • Grey injection molded PP\/Carbon Fiber cone<\/li>\n\n\n\n
                            • Butyl rubber surround<\/li>\n\n\n\n
                            • Shallow mounting depth<\/li>\n\n\n\n
                            • 2-ohm impedance<\/li>\n<\/ul>\n\n\n\n
                              \n\n\n\n

                              L2-522 Powerbass 5.25″ 2 Ohm
                              Full-Range Speakers<\/h2>\n\n\n\n

                              $180 In Stock!<\/strong><\/p>\n\n\n

                              \n
                              \"\"<\/figure>\n<\/div>\n\n\n
                                \n
                              • 5.25″ Co-axial speaker system<\/li>\n\n\n\n
                              • OEM Drop-in replacement design<\/li>\n\n\n\n
                              • Grey injection molded PP\/Carbon Fiber cone<\/li>\n\n\n\n
                              • Butyl rubber surround<\/li>\n\n\n\n
                              • Shallow mounting depth<\/li>\n\n\n\n
                              • 3\/4″ Aluminum dome tweeter<\/li>\n\n\n\n
                              • Sound Expander Lens tweeter ring<\/li>\n\n\n\n
                              • 2-ohm impedance<\/li>\n<\/ul>\n\n\n\n
                                \n\n\n\n

                                L2-682 Powerbass 6 x 8″ 2 Ohm
                                Full-Range Speakers<\/h2>\n\n\n\n

                                $180 In Stock!<\/strong><\/p>\n\n\n

                                \n
                                \"\"<\/figure>\n<\/div>\n\n\n
                                  \n
                                • 6 x 8″ Co-axial speaker system<\/li>\n\n\n\n
                                • OEM Drop-in replacement design<\/li>\n\n\n\n
                                • Grey injection molded PP\/Carbon Fiber cone<\/li>\n\n\n\n
                                • Butyl rubber surround<\/li>\n\n\n\n
                                • Shallow mounting depth<\/li>\n\n\n\n
                                • 3\/4″ Aluminum dome tweeter<\/li>\n\n\n\n
                                • Sound Expander Lens tweeter ring<\/li>\n\n\n\n
                                • 2-ohm impedance<\/li>\n<\/ul>\n\n\n\n
                                  \n\n\n\n

                                  PowerBass BTA8 <\/strong><\/h2>\n\n\n\n

                                  In Stock!<\/strong> $269  <\/strong><\/h2>\n\n\n
                                  \n
                                  \"BTA8-angle-w-straps\"<\/figure>\n<\/div>\n\n\n

                                  The BTA-8 has it\u2019s own built-in active amplifier\u2014a first for our Autosound line up!  This vented enclosure contains a Class A\/B mono bass amplifier perfectly matched to power the 8-inch woofer.  We came up with a  compact trapezoid shaped enclosure, perfectly tuned to get the most out of the proprietary 8-inch subwoofer.  The  geometric design maximizes transient response, reducing the negative effects that a small enclosure can have on the subwoofer by dispersing and dissipating standing waves away from the subwoofer.  The result is cleaner, deeper bass.
                                  Supplied with \u201cplug in\u201d connectors for speaker and power installation is simple and straightforward.  The addition of dual mounting straps means the BTA-8 can easily be taken out of vehicle when extra space is needed.  Also since no holes need to be cut the BTA-8 is a perfect choice for leased vehicles that could use a little extra bass.<\/p>\n\n\n\n

                                    \n
                                  • Black Carpeted Enclosure with Embroidered Logo <\/strong>CAD (Computer Aided Design) for maximum output in small spaces<\/li>\n\n\n\n
                                  • 8-inch Polypropylene Woofer <\/strong>with 40 oz ferrite magnet and pole venting<\/li>\n\n\n\n
                                  • 150 watts RMS Mono Amplifier (300 watts Peak Music Power)<\/strong> featuring variable Gain, Low Pass and Bass EQ<\/li>\n\n\n\n
                                  • High \/ Low Input <\/strong>Compatible with OEM or aftermarket radios
                                    Variable Remote Gain Control (Included)<\/strong><\/li>\n<\/ul>\n\n\n\n
                                    \n\n\n\n

                                    PowerBass PS-AWB121 12″ Amplified Sub Enclosure<\/strong><\/h2>\n\n\n\n

                                    In Stock!<\/strong> $540<\/h2>\n\n\n
                                    \n
                                    \"\"<\/figure>\n<\/div>\n\n
                                    \n
                                    \"\"<\/figure>\n<\/div>\n\n\n

                                     <\/h2>\n\n\n\n
                                      \n
                                    • Single 12″  Amplified Bass Reflex Subwoofer Enclosure<\/li>\n\n\n\n
                                    • Injection Molded PP Cone Woofer<\/li>\n\n\n\n
                                    • 200 Watts RMS\/400 Watts Max (Power Handling)<\/li>\n\n\n\n
                                    • 2″ BASV Voice Coil Former<\/li>\n\n\n\n
                                    • Large Roll Butyl Rubber Surround<\/li>\n\n\n\n
                                    • Computer Optimized Bass Reflex Enclosure<\/li>\n\n\n\n
                                    • Durable Aircraft Grade Vinyl Finish<\/li>\n\n\n\n
                                    • 1-Channel 200 Watt High Efficiency Class A\/B Design Amplifier<\/li>\n\n\n\n
                                    • High Level (Speaker)\/Low Level (RCA) Input<\/li>\n\n\n\n
                                    • Soft Delay Turn On\/Off Circuit<\/li>\n\n\n\n
                                    • Auto Turn-on (high level input only)<\/li>\n\n\n\n
                                    • Variable Low Pass Electronic Crossover 50Hz \u2013 200Hz<\/li>\n\n\n\n
                                    • Variable 12dB Bass Boost EQ @ 45 Hz<\/li>\n\n\n\n
                                    • Variable Gain Control<\/li>\n\n\n\n
                                    • Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output<\/li>\n\n\n\n
                                    • Variable Wired Remote Gain Control Included<\/li>\n\n\n\n
                                    • Mounting Hardware Included<\/li>\n\n\n\n
                                    • 18\u00be” x 13\u00bd” x 14\u2156”<\/li>\n<\/ul>\n\n\n\n
                                      \n\n\n\n

                                      PowerBass PS-AWB101 10″ Amplified Sub Enclosure<\/strong><\/h2>\n\n\n\n

                                      In Stock!<\/strong> $500<\/h2>\n\n\n
                                      \n
                                      \"\"<\/figure>\n<\/div>\n\n
                                      \n
                                      \"\"<\/figure>\n<\/div>\n\n\n

                                       <\/h2>\n\n\n\n
                                        \n
                                      • Single 10″ Amplified Bass Reflex Subwoofer Enclosure<\/li>\n\n\n\n
                                      • Injection Molded PP Cone Woofer<\/li>\n\n\n\n
                                      • 175 Watts RMS\/350 Watts Max (Power Handling)<\/li>\n\n\n\n
                                      • 2″ BASV Voice Coil Former<\/li>\n\n\n\n
                                      • Large Roll Butyl Rubber Surround<\/li>\n\n\n\n
                                      • Computer Optimized Bass Reflex Enclosure<\/li>\n\n\n\n
                                      • Durable Aircraft Grade Vinyl Finish<\/li>\n\n\n\n
                                      • 1-Channel 175 Watt High Efficiency Class A\/B Design<\/li>\n\n\n\n
                                      • High Level (Speaker)\/Low Level (RCA) Input<\/li>\n\n\n\n
                                      • Soft Delay Turn On\/Off Circuit<\/li>\n\n\n\n
                                      • Auto Turn-on (high level input only)<\/li>\n\n\n\n
                                      • Variable Low Pass Electronic Crossover 50Hz \u2013 200Hz<\/li>\n\n\n\n
                                      • Variable 12dB Bass Boost EQ @ 45 Hz<\/li>\n\n\n\n
                                      • Variable Gain Control<\/li>\n\n\n\n
                                      • Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output<\/li>\n\n\n\n
                                      • Variable Wired Remote Gain Control Included<\/li>\n\n\n\n
                                      • Mounting Hardware Included<\/li>\n\n\n\n
                                      • 17″ x 12\u00bc” x 13\u00be”<\/li>\n<\/ul>\n\n\n\n
                                        \n\n\n\n

                                        PS-ADF110T 10″ Amplified Downfiring Enclosure <\/h1>\n\n\n\n

                                         In Stock!<\/strong> $480<\/h1>\n\n\n
                                        \n
                                        \"\"<\/figure>\n<\/div>\n\n\n
                                          \n
                                        • Single 10″ 175 Watt RMS Amplified Downfiring Enclosure<\/li>\n\n\n\n
                                        • Computer Optimized 10″ Thin Subwoofer Enclosure<\/li>\n\n\n\n
                                        • Custom Injected Molded Cone<\/li>\n\n\n\n
                                        • Large Roll Rubber Surround<\/li>\n\n\n\n
                                        • 2″ Vented KSV Voice Coil Former<\/li>\n\n\n\n
                                        • Perimeter Aero Voice Coil Venting<\/li>\n\n\n\n
                                        • Poly-carbonate\/Glass Fiber Composite Turbine Basket<\/li>\n\n\n\n
                                        • Chrome Push Terminals<\/li>\n\n\n\n
                                        • 2-Tone Vinyl\/Carpet Finish<\/li>\n\n\n\n
                                        • 1-Channel 275 Watt High Efficiency Class A\/B Design<\/li>\n\n\n\n
                                        • High Level (Speaker)\/Low Level RCA input<\/li>\n\n\n\n
                                        • Soft Delay Turn On\/Off Circuit<\/li>\n\n\n\n
                                        • Auto Turn-on (high level input only)<\/li>\n\n\n\n
                                        • Variable Low Pass Electronic Crossover 50Hz – 200Hz<\/li>\n\n\n\n
                                        • Variable 12db Bass Boost EQ @ 45Hz<\/li>\n\n\n\n
                                        • Variable Gain Control<\/li>\n\n\n\n
                                        • Protection Circuit: Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output<\/li>\n\n\n\n
                                        • Wired Remote Gain Control Included<\/li>\n\n\n\n
                                        • Down Firing Air Suspension Enclosure<\/li>\n\n\n\n
                                        • Heavy-Duty Reinforced Box Design<\/li>\n\n\n\n
                                        • Mounting Hardware Included<\/li>\n<\/ul>\n\n\n\n
                                          \n\n\n\n

                                          PS-DF110T 10″ Downfiring Enclosure<\/h1>\n\n\n\n

                                           In Stock!<\/strong> $340<\/h1>\n\n\n
                                          \n
                                          \"\"<\/figure>\n<\/div>\n\n\n
                                            \n
                                          • Computer Optimized 10″ Thin Subwoofer Enclosure<\/li>\n\n\n\n
                                          • 275 watt RMS\/550 Watts Max<\/li>\n\n\n\n
                                          • One Piece Injection Molded Cone<\/li>\n\n\n\n
                                          • Single Piece Custom Injected Molded Cone<\/li>\n\n\n\n
                                          • Large Roll Rubber Surround<\/li>\n\n\n\n
                                          • 2″ Vented KSV Voice Coil Former<\/li>\n\n\n\n
                                          • Perimeter Aero Voice Coil Venting<\/li>\n\n\n\n
                                          • Poly-carbonate\/Glass Fiber Composite Turbine Basket<\/li>\n\n\n\n
                                          • Chrome Push Terminals<\/li>\n\n\n\n
                                          • 2-Tone Vinyl\/Carpet Finish<\/li>\n\n\n\n
                                          • Down Firing Air Suspension Enclosure<\/li>\n\n\n\n
                                          • Heavy-Duty Reinforced Box Design<\/li>\n\n\n\n
                                          • Single 4-ohm Input<\/li>\n<\/ul>\n\n\n\n
                                            \n\n\n\n

                                            STA10 10″ Amplified Bass Enclosure<\/h1>\n\n\n\n

                                             In Stock!<\/strong> $600<\/h1>\n\n\n
                                            \n
                                            \"\"<\/figure>\n<\/div>\n\n\n
                                              \n
                                            • Single 10″ 150 Watt RMS Amplified Under Seat Subwoofer Enclosure<\/li>\n\n\n\n
                                            • Extruded Aluminum  Enclosure with Dynamic Damping<\/li>\n\n\n\n
                                            • 10\u201d Injection Molded PP Cone Woofer<\/li>\n\n\n\n
                                            • 1.5″ KSV Voice Coil Former<\/li>\n\n\n\n
                                            • 1-Channel 150 Watt High Efficiency Class A\/B Design<\/li>\n\n\n\n
                                            • High Level (Speaker)\/Low Level (RCA) Input<\/li>\n\n\n\n
                                            • Soft Delay Turn On\/Off Circuit<\/li>\n\n\n\n
                                            • Auto Turn-on (high level input only)<\/li>\n\n\n\n
                                            • Variable Low Pass Electronic Crossover<\/li>\n\n\n\n
                                            • Variable 12dB Bass Boost EQ @ 45 Hz<\/li>\n\n\n\n
                                            • Variable Gain Control<\/li>\n\n\n\n
                                            • Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output<\/li>\n\n\n\n
                                            • Variable Wired Remote Gain Control Included<\/li>\n\n\n\n
                                            • Mounting Hardware Included<\/li>\n\n\n\n
                                            • Dimensions (in Inches): 3.2″H x 10.9″W x 14.4″D<\/li>\n<\/ul>\n\n\n\n
                                              \n\n\n\n

                                              STA8 8″ Amplified Bass Enclosure<\/h2>\n\n\n\n

                                              \u00a0In Stock! $500<\/strong><\/p>\n\n\n

                                              \n
                                              \"\"<\/figure>\n<\/div>\n\n\n
                                                \n
                                              • Subwoofer Frequency Range:\u00a020 Hz – 200 Hz<\/li>\n\n\n\n
                                              • Power Supply:\u00a0Unregulated PWM<\/li>\n\n\n\n
                                              • Inputs:\u00a0Low Level (RCA)\/High Level (speaker level)<\/li>\n\n\n\n
                                              • Depth:\u00a013.5″<\/li>\n\n\n\n
                                              • 2-ohm Power:\u00a0150 watts RMS\/300 watts max<\/li>\n\n\n\n
                                              • Selectable Subwoofer EQ:\u00a00dB – 12 dB @ 45 Hz<\/li>\n\n\n\n
                                              • Equalization Boost\/Cut:\u00a00dB – 12 dB<\/li>\n\n\n\n
                                              • Height:\u00a02.75″<\/li>\n\n\n\n
                                              • Width:\u00a09.75″<\/li>\n\n\n\n
                                              • Material:\u00a0Extruded Aluminum<\/li>\n\n\n\n
                                              • Subwoofer EQ Frequency:\u00a045 Hz<\/li>\n\n\n\n
                                              • Variable Subwoofer EQ:\u00a00dB – 12 dB\u00a0<\/li>\n\n\n\n
                                              • Low-Pass Crossover Freq:\u00a040 Hz – 200 Hz<\/li>\n\n\n\n
                                              • Input Sensitivity:\u00a0250 mV – 6V (low level)\/1.0V – 10 V<\/li>\n\n\n\n
                                              • Output Power (14.4 V) @ 2 ohm:\u00a0150 watts RMS\/300 watts max<\/li>\n\n\n\n
                                              • Frequency Response:\u00a020 Hz – 250 Hz<\/li>\n\n\n\n
                                              • Dimensions (in Inches):\u00a02.75″H x 9.75″L x 13.5″D<\/li>\n<\/ul>\n\n\n\n
                                                \n\n\n\n

                                                PS-AWB101T 10″ Amplified Slim Loaded Enclosure <\/h1>\n\n\n\n

                                                In Stock!<\/strong> $450<\/h1>\n\n\n
                                                \n
                                                \"\"<\/figure>\n<\/div>\n\n\n
                                                  \n
                                                • Single 10″ 175 Watt RMS Amplified Slim Subwoofer Enclosure<\/li>\n\n\n\n
                                                • Injection Molded PP Cone Woofer<\/li>\n\n\n\n
                                                • 2″ KSV Voice Coil Former<\/li>\n\n\n\n
                                                • Large Roll Butyl Rubber Surround<\/li>\n\n\n\n
                                                • Computer Optimized Sealed Enclosure<\/li>\n\n\n\n
                                                • Durable Aircraft Grade Vinyl Finish<\/li>\n\n\n\n
                                                • 1-Channel 175 Watt High Efficiency Class A\/B Design<\/li>\n\n\n\n
                                                • High Level (Speaker)\/Low Level (RCA) Input<\/li>\n\n\n\n
                                                • Soft Delay Turn On\/Off Circuit<\/li>\n\n\n\n
                                                • Auto Turn-on (high level input only)<\/li>\n\n\n\n
                                                • Variable Low Pass Electronic Crossover 50Hz \u2013 200Hz<\/li>\n\n\n\n
                                                • Variable 12dB Bass Boost EQ @ 45 Hz<\/li>\n\n\n\n
                                                • Variable Gain Control<\/li>\n\n\n\n
                                                • Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output<\/li>\n\n\n\n
                                                • Wired Remote Gain Control Included<\/li>\n\n\n\n
                                                • Mounting Hardware Included<\/li>\n<\/ul>\n\n\n\n
                                                  \n\n\n\n

                                                  PS-AWB121T 12″ Amplified Thin Loaded Enclosure<\/h1>\n\n\n\n

                                                  In Stock!<\/strong> $480<\/h1>\n\n\n
                                                  \n
                                                  \"\"<\/figure>\n<\/div>\n\n\n
                                                    \n
                                                  • Single 12″ 200 Watt RMS Amplified Slim Subwoofer Enclosure<\/li>\n\n\n\n
                                                  • Injection Molded PP Cone Woofer<\/li>\n\n\n\n
                                                  • 2″ KSV Voice Coil Former<\/li>\n\n\n\n
                                                  • Large Roll Butyl Rubber Surround<\/li>\n\n\n\n
                                                  • Computer Optimized Sealed Enclosure<\/li>\n\n\n\n
                                                  • Durable Aircraft Grade Vinyl Finish<\/li>\n\n\n\n
                                                  • 1-Channel 200 Watt High Efficiency Class A\/B Design<\/li>\n\n\n\n
                                                  • High Level (Speaker)\/Low Level (RCA) Input<\/li>\n\n\n\n
                                                  • Soft Delay Turn On\/Off Circuit<\/li>\n\n\n\n
                                                  • Auto Turn-on (high level input only)<\/li>\n\n\n\n
                                                  • Variable Low Pass Electronic Crossover 50Hz \u2013 200Hz<\/li>\n\n\n\n
                                                  • Variable 12dB Bass Boost EQ @ 45 Hz<\/li>\n\n\n\n
                                                  • Variable Gain Control<\/li>\n\n\n\n
                                                  • Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output<\/li>\n\n\n\n
                                                  • Wired Remote Gain Control Included<\/li>\n\n\n\n
                                                  • Mounting Hardware Included<\/li>\n<\/ul>\n\n\n\n
                                                    \n\n\n\n

                                                    PS-AWB121T 12″ Amplified Thin Loaded Enclosure<\/h1>\n\n\n\n

                                                    In Stock!<\/strong> $480<\/h1>\n\n\n
                                                    \n
                                                    \"\"<\/figure>\n<\/div>\n\n\n
                                                      \n
                                                    • Single 12″ 200 Watt RMS Amplified Slim Subwoofer Enclosure<\/li>\n\n\n\n
                                                    • Injection Molded PP Cone Woofer<\/li>\n\n\n\n
                                                    • 2″ KSV Voice Coil Former<\/li>\n\n\n\n
                                                    • Large Roll Butyl Rubber Surround<\/li>\n\n\n\n
                                                    • Computer Optimized Sealed Enclosure<\/li>\n\n\n\n
                                                    • Durable Aircraft Grade Vinyl Finish<\/li>\n\n\n\n
                                                    • 1-Channel 200 Watt High Efficiency Class A\/B Design<\/li>\n\n\n\n
                                                    • High Level (Speaker)\/Low Level (RCA) Input<\/li>\n\n\n\n
                                                    • Soft Delay Turn On\/Off Circuit<\/li>\n\n\n\n
                                                    • Auto Turn-on (high level input only)<\/li>\n\n\n\n
                                                    • Variable Low Pass Electronic Crossover 50Hz \u2013 200Hz<\/li>\n\n\n\n
                                                    • Variable 12dB Bass Boost EQ @ 45 Hz<\/li>\n\n\n\n
                                                    • Variable Gain Control<\/li>\n\n\n\n
                                                    • Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output<\/li>\n\n\n\n
                                                    • Wired Remote Gain Control Included<\/li>\n\n\n\n
                                                    • Mounting Hardware Included<\/li>\n<\/ul>\n\n\n\n
                                                      \n\n\n\n

                                                      PSWB110 & PSWB112 10″ & 12″ Loaded Ported Enclosure<\/h2>\n\n\n\n

                                                      In Stock!<\/strong> $200 (10″) & $240 (12″)<\/strong><\/p>\n\n\n

                                                      \n
                                                      \"\"<\/figure>\n<\/div>\n\n\n
                                                        \n
                                                      • Computer optimized acoustic chamber<\/li>\n\n\n\n
                                                      • 2-Layer DDC coated black ribbed paper cone<\/li>\n\n\n\n
                                                      • 2″ BASV high temperature voice coil<\/li>\n\n\n\n
                                                      • Double pressed treated foam surround<\/li>\n\n\n\n
                                                      • 2-tone Aircraft grade vinyl finish<\/li>\n\n\n\n
                                                      • Power handling:\n
                                                          \n
                                                        • 10″: 250W RMS \/ 500W Max<\/li>\n\n\n\n
                                                        • 12″: 275W RMS \/ 550W Max<\/li>\n<\/ul>\n<\/li>\n\n\n\n
                                                        • Single 4-ohm input<\/li>\n<\/ul>\n\n\n\n
                                                          \n\n\n\n

                                                          XLWB8 8″ Sub and Ported Enclosure<\/h2>\n\n\n\n

                                                          In Stock! $320<\/strong><\/p>\n\n\n

                                                          \n
                                                          \"\"<\/figure>\n<\/div>\n\n\n
                                                            \n
                                                          • Computer optimized acoustic chamber<\/li>\n\n\n\n
                                                          • 4-Layer DDC coated non-pressed paper cone<\/li>\n\n\n\n
                                                          • 2″ BASV high temperature voice coil<\/li>\n\n\n\n
                                                          • High roll butyl rubber surround<\/li>\n\n\n\n
                                                          • Shallow mounting depth<\/li>\n\n\n\n
                                                          • Aircraft grade vinyl finish<\/li>\n\n\n\n
                                                          • 200W RMS \/ 400W Max<\/li>\n\n\n\n
                                                          • 4-ohm impedance<\/li>\n<\/ul>\n","protected":false},"excerpt":{"rendered":"

                                                            Speakers Subwoofers Powerbass Amplified Powersports Soundbar with Bluetooth XL650 $1000 XL850 $1150 XL1250 $1250 XLPS200 Powerbass 2.75″ Amplified Bluetooth Speaker Pods $450 In Stock! L Series – Factory Replacement Speakers Powerbass’ L Series was designed to upgrade factory systems. The L Series Wave Guide Lens compliments the 3\/4″ aluminum alloy dome tweeter to allow you…<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":6133,"menu_order":3,"comment_status":"closed","ping_status":"closed","template":"","meta":{"footnotes":""},"class_list":["post-597","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/araautoaccessories.com\/wordpress\/wp-json\/wp\/v2\/pages\/597","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/araautoaccessories.com\/wordpress\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/araautoaccessories.com\/wordpress\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/araautoaccessories.com\/wordpress\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/araautoaccessories.com\/wordpress\/wp-json\/wp\/v2\/comments?post=597"}],"version-history":[{"count":85,"href":"https:\/\/araautoaccessories.com\/wordpress\/wp-json\/wp\/v2\/pages\/597\/revisions"}],"predecessor-version":[{"id":14065,"href":"https:\/\/araautoaccessories.com\/wordpress\/wp-json\/wp\/v2\/pages\/597\/revisions\/14065"}],"up":[{"embeddable":true,"href":"https:\/\/araautoaccessories.com\/wordpress\/wp-json\/wp\/v2\/pages\/6133"}],"wp:attachment":[{"href":"https:\/\/araautoaccessories.com\/wordpress\/wp-json\/wp\/v2\/media?parent=597"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}